MFH 050R104T, MFH-RAPTOR, 50.00mm Cutting Diameter, High-Feed Face Mill
$572.42
(No reviews yet)
Write a Review
MFH 050R104T, MFH-RAPTOR, 50.00mm Cutting Diameter, High-Feed Face Mill
MFH 050R104T, MFH-RAPTOR High-Feed Face Mill, 10 Degree Lead Angle, Standard Pitch Face Mill with a 50.00mm Cutting Diameter and Inch Bore Diameter for Facing, Shouldering, Slotting, Ramping, Helical Milling, Plunging Applications
- Tool Style:
- MFH
- Material:
- Steel
- Application:
- Facing|Helical Milling|Plunging|Ramping|Shouldering|Slotting
- Hand:
- Right-Hand
- [KAPR] Tool Entering Angle (Degree):
- 10
- [DCN] Cutting Diameter Minimum (mm):
- 33.00
- [DCX] Cutting Diameter Maximum (mm):
- 50.00
- [APMX] Maximum Depth of Cut (Decimal Inch):
- 0.0591 (GM), 0.0591 (GH), 0.1378 (LD), 0.0591 (FL)
- [APMX] Maximum Depth of Cut (mm):
- 1.50 (GM), 1.50 (GH), 3.50 (LD), 1.50 (FL)
- Cutter Pitch:
- Standard Pitch
- Number of Inserts:
- 4
- Number of Flutes:
- 4
- Bore Diameter (Inch/Metric):
- Inch
- [DCB] Connection Bore Diameter (mm):
- 22.23
- [DCSFMS] Contact Surface Diameter Machine Side (mm):
- 47.00
- Coolant Through (Yes/No):
- Yes
- Insert Holding Method:
- Screw
- Unit (inch/mm):
- mm
- Feature 1:
- 10 Degree Lead Angle High Feed Face Mill
- Feature 2:
- Application: Facing, Shouldering, Slotting, Ramping, Helical Milling, Plunging
- Feature 3:
- Clamp Screw Insert Holding Design
- Feature 4:
- Compatible with (4) SOMT10… Inserts
- Feature 5:
- Reduced chattering with convex cutting edge design controls initial impact when entering the workpiece
- ANSI Part Number:
- MFH050R104T
- ISO Part Number:
- MFH050R-10-4T
- US Stock:
- 0
- Worldwide Stock:
- 0
- Compatible Inserts (Partial):
- SOMT10…
- Old Material Number:
- 8842125
- Insert Screw:
- SB-4090TRPN
- Arbor Bolt:
- HH10×30
- Anti-Seize Compound:
- P-37
- Wrench (for Insert Screw):
- DTPM-15
- Tightening Torque:
- 3.5 Nm (for Insert Screw)
- [LF] Functional Length (mm):
- 50.00
- Product Notes:
- The Cutting Diameter (DCN) value shown is when GM inserts are installed in the cutter body. For GH Inserts: DC = 1.2992", FL Inserts: DC = 1.2992", LD Inserts: DC = 1.4370"
- Product Notes 1:
- Coat Anti-Seize Compound (P-37) thinly on portion of taper and thread prior to installation.
- [DC] Cutting Diameter (Decimal Inch):
- 1.2992 - 1.9685
- [DC] Cutting Diameter (mm):
- 33.00 - 50.00
- [DCN] Cutting Diameter Minimum (Decimal Inch):
- 1.2992
- [DCX] Cutting Diameter Maximum (Decimal Inch):
- 1.9685
- [DCB] Connection Bore Diameter (Decimal Inch):
- 0.8752
- [DCSFMS] Contact Surface Diameter Machine Side (Decimal Inch):
- 1.8504
- [LF] Functional Length (Decimal Inch):
- 1.9685
