MFH 0625S625014T35, MFH-Micro, Standard Length Shank, High-Feed End Mill
$303.56
(No reviews yet)
Write a Review
MFH 0625S625014T35, MFH-Micro, Standard Length Shank, High-Feed End Mill
MFH 0625S625014T35, Standard Length, Cylindrical Shank, 4 Flute, 10 Degree High-Feed End Mill with a 0.6250" Cutting Diameter for Shouldering, Facing, Slotting, Ramping, Helical Milling, Plunging Applications
- Tool Style:
- MFH
- Material:
- Steel
- Application:
- Facing|Helical Milling|Plunging|Ramping|Shouldering|Slotting
- Hand:
- Right-Hand
- [KAPR] Tool Entering Angle (Degree):
- 10
- [DCN] Cutting Diameter Minimum (mm):
- 12.08
- [DCX] Cutting Diameter Maximum (mm):
- 15.88
- [APMX] Maximum Depth of Cut (Decimal Inch):
- 0.0197
- [APMX] Maximum Depth of Cut (mm):
- 0.50
- Number of Inserts:
- 4
- Number of Flutes:
- 4
- Shank Type:
- Standard Length
- Weldon Flat:
- No
- [DCON] Connection Diameter (mm):
- 15.88
- Coolant Through (Yes/No):
- Yes
- Insert Holding Method:
- Screw
- Unit (inch/mm):
- inch
- Feature 1:
- Reduce cycle time during roughing applications
- Feature 2:
- Low resistance and durable design aids in chatter resistant machining
- Feature 3:
- Molded convex cutting edge controls initial impact when entering the workpiece
- Feature 4:
- Wide range of machining applications
- Feature 5:
- Can replace solid end mills to reduce machining costs
- ANSI Part Number:
- MFH0625S625014T35
- ISO Part Number:
- MFH0625-S625-01-4T35
- US Stock:
- 0
- Worldwide Stock:
- 0
- Compatible Inserts (Partial):
- LPGT01…
- Old Material Number:
- 8607021
- Insert Screw:
- SB-1840TRP
- Anti-Seize Compound:
- P-37
- Wrench (for Insert Screw):
- FTP-6
- Tightening Torque:
- 0.5 Nm (for Insert Screw)
- [LF] Functional Length (mm):
- 88.90
- [LH] Head Length (mm):
- 25.40
- Product Notes 1:
- Coat Anti-Seize Compound (P-37) thinly on portion of taper and thread prior to installation.
- [DC] Cutting Diameter (Decimal Inch):
- 0.4756 - 0.6252
- [DC] Cutting Diameter (mm):
- 12.08 - 15.88
- [DCN] Cutting Diameter Minimum (Decimal Inch):
- 0.4756
- [DCX] Cutting Diameter Maximum (Decimal Inch):
- 0.6252
- [DCON] Connection Diameter (Decimal Inch):
- 0.6252
- [LF] Functional Length (Decimal Inch):
- 3.5000
- [LH] Head Length (Decimal Inch):
- 1.0000
