MFH 1500W150103T, MFH-RAPTOR, Standard Length Shank, High-Feed End Mill
$450.24
(No reviews yet)
Write a Review
MFH 1500W150103T, MFH-RAPTOR, Standard Length Shank, High-Feed End Mill
MFH 1500W150103T, Standard Length, Weldon Shank, 3 Flute, 10 Degree High-Feed End Mill with a 1.5000" Cutting Diameter for Shouldering, Facing, Slotting, Ramping, Helical Milling, Plunging Applications
- Tool Style:
- MFH
- Material:
- Steel
- Application:
- Facing|Helical Milling|Plunging|Ramping|Shouldering|Slotting
- Hand:
- Right-Hand
- [KAPR] Tool Entering Angle (Degree):
- 10
- [DCN] Cutting Diameter Minimum (mm):
- 21.10
- [DCX] Cutting Diameter Maximum (mm):
- 38.10
- [APMX] Maximum Depth of Cut (Decimal Inch):
- 0.0591 (GM/GH), 0.1378 (LD), 0.0591 (FL)
- [APMX] Maximum Depth of Cut (mm):
- 1.50 (GM/GH), 3.50 (LD), 1.50 (FL)
- Number of Inserts:
- 3
- Number of Flutes:
- 3
- Shank Type:
- Standard Length
- Weldon Flat:
- Yes
- [DCON] Connection Diameter (mm):
- 38.10
- Coolant Through (Yes/No):
- Yes
- Insert Holding Method:
- Screw
- Unit (inch/mm):
- inch
- Feature 1:
- Reduce cycle time during roughing applications
- Feature 2:
- Reduced chattering with convex cutting edge design
- Feature 3:
- 3 different insert designs available for a variety of machining operations
- Feature 4:
- LD chipbreaker can be used for both large D.O.C. and high-feed machining
- Feature 5:
- Compatible with (3) SOMT10… style inserts
- ANSI Part Number:
- MFH1500W150103T
- ISO Part Number:
- MFH1500-W150-10-3T
- US Stock:
- 0
- Worldwide Stock:
- 0
- Compatible Inserts (Partial):
- SOMT10…
- Old Material Number:
- 8606403
- Insert Screw:
- SB-4075TRP
- Anti-Seize Compound:
- P-37
- Wrench (for Insert Screw):
- DTPM-15
- Tightening Torque:
- 3.5 Nm (for Insert Screw)
- [LF] Functional Length (mm):
- 152.40
- [LH] Head Length (mm):
- 50.80
- Product Notes:
- The Cutting Diameter (DCN) value shown is when GM inserts are installed in the cutter body. For GH Inserts: DC = 0.8307", FL Inserts: DC = 1.0079", LD Inserts: DC = 0.9685"
- Product Notes 1:
- Coat Anti-Seize Compound (P-37) thinly on portion of taper and thread prior to installation.
- [DC] Cutting Diameter (Decimal Inch):
- 0.8307 - 1.5000
- [DC] Cutting Diameter (mm):
- 21.10 - 38.10
- [DCN] Cutting Diameter Minimum (Decimal Inch):
- 0.8307
- [DCX] Cutting Diameter Maximum (Decimal Inch):
- 1.5000
- [DCON] Connection Diameter (Decimal Inch):
- 1.5000
- [LF] Functional Length (Decimal Inch):
- 6.0000
- [LH] Head Length (Decimal Inch):
- 2.0000
