MFH 35S32102T200, MFH-RAPTOR, Long Length Shank, High-Feed End Mill
$447.60
(No reviews yet)
Write a Review
MFH 35S32102T200, MFH-RAPTOR, Long Length Shank, High-Feed End Mill
MFH 35S32102T200, Long Length, Cylindrical Shank, 2 Flute, 10 Degree High-Feed End Mill with a 35.00mm Cutting Diameter for Shouldering, Facing, Slotting, Ramping, Helical Milling, Plunging Applications
- Tool Style:
- MFH
- Material:
- Steel
- Application:
- Facing|Helical Milling|Plunging|Ramping|Shouldering|Slotting
- Hand:
- Right-Hand
- [KAPR] Tool Entering Angle (Degree):
- 10
- [DCN] Cutting Diameter Minimum (mm):
- 18.00
- [DCX] Cutting Diameter Maximum (mm):
- 35.00
- [APMX] Maximum Depth of Cut (Decimal Inch):
- 0.0591 (GM/GH), 0.1378 (LD), 0.0591 (FL)
- [APMX] Maximum Depth of Cut (mm):
- 1.50 (GM/GH), 3.50 (LD), 1.50 (FL)
- Number of Inserts:
- 2
- Number of Flutes:
- 2
- Shank Type:
- Long Length
- Weldon Flat:
- No
- [DCON] Connection Diameter (mm):
- 32.00
- Coolant Through (Yes/No):
- Yes
- Insert Holding Method:
- Screw
- Unit (inch/mm):
- mm
- Feature 1:
- Reduce cycle time during roughing applications
- Feature 2:
- Reduced chattering with convex cutting edge design
- Feature 3:
- 3 different insert designs available for a variety of machining operations
- Feature 4:
- LD chipbreaker can be used for both large D.O.C. and high-feed machining
- Feature 5:
- Compatible with (2) SOMT10… style inserts
- ANSI Part Number:
- MFH35S32102T200
- ISO Part Number:
- MFH35-S32-10-2T-200
- US Stock:
- 0
- Worldwide Stock:
- 0
- Compatible Inserts (Partial):
- SOMT10…
- Old Material Number:
- 8839078
- Insert Screw:
- SB-4075TRP
- Anti-Seize Compound:
- P-37
- Wrench (for Insert Screw):
- DTPM-15
- Tightening Torque:
- 3.5 Nm (for Insert Screw)
- [LF] Functional Length (mm):
- 200.00
- [LH] Head Length (mm):
- 50.00
- Product Notes:
- The Cutting Diameter (DCN) value shown is when GM inserts are installed in the cutter body. For GH Inserts: DC = 0.7087", FL Inserts: DC = 0.8858", LD Inserts: DC = 0.8465"
- Product Notes 1:
- Coat Anti-Seize Compound (P-37) thinly on portion of taper and thread prior to installation.
- [DC] Cutting Diameter (Decimal Inch):
- 0.7087 - 1.3780
- [DC] Cutting Diameter (mm):
- 18.00 - 35.00
- [DCN] Cutting Diameter Minimum (Decimal Inch):
- 0.7087
- [DCX] Cutting Diameter Maximum (Decimal Inch):
- 1.3780
- [DCON] Connection Diameter (Decimal Inch):
- 1.2598
- [LF] Functional Length (Decimal Inch):
- 7.8740
- [LH] Head Length (Decimal Inch):
- 1.9685
